Skip to product information
1 of 1

STM-Pro-NZ

STM PRO X30 Mould Making Silicone Thixotropic Thickener and Accelerator 100g

STM PRO X30 Mould Making Silicone Thixotropic Thickener and Accelerator 100g

Regular price $18.40 NZD
Regular price Sale price $18.40 NZD
Sale Sold out
Availability: This item is usually despatched same day

This thickener and accelerator is a liquid additive that can be used with STMPRO X30 Mould Making Silicone to thicken the silicone so that it can be applied to vertical surfaces. As you increase the percentage of the additive, the silicone will thicken and the time to cure will be accelerated.

Instructions
Mix X30 silicone and catalyst as per the product's instructions, then begin to add thixotropic additive up to 10% by weight, mixing in well until the required consistency is achieved. 2% (eg. 20g in 1kg Silicone) will not noticeably thicken the silicone, but the time to cure will be accelerated by about 20 minutes. 8% (eg. 80g in 1kg Silicone) will thicken the silicone, it will still flow slowly and will be workable for several minutes. 10% (eg. 100g in 1kg Silicone) will thicken the silicone to a paste so that it will no longer flow and it will set solid within a few minutes.

FEATURES:
  • Thickens X30 silicone so it can be applied to vertical surfaces and fills voids
  • Speeds up setting time for X30 Silicone
SPECIFICATIONS:
  • Bottle Size: 100g
  • Compatible with: X30 silicone. Not compatible with A10 or F25 platinum silicones as it will prevent them from curing.
View full details